Filter
Top Products
30
English
To Select a Passage Within a Track————————————
Press the up or down cursor key continuously while a CD is playing.
Pressing the up (¡ ) cursor key advances the CD rapidly, pressing the down ( 1) cursor key
plays the CD backwards rapidly. Release the cursor key at the point at which you wish to resume normal
playback.
Note: You cannot perform these fast forwards or fast backwards operation with the Remote Control.
Locating a Track With the Remote Control Directly ———
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
1. Press the DISC (1-3) button for the disc tray containing the track
you want to listen to.
• Example: for the third disc, press the DISC 3 button.
2. Enter the number of the track you want to listen to with the num-
ber keys.
The selected track starts playing.
• Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For
track 32, press +10 three times, then 2.
Programming the Playing Order of the
Tracks
You can change the order in which the discs and tracks play, and select only the discs and tracks you want
from among those loaded in the CD Player.
o You can program up to 32 steps in any desired order from among the discs in the player.
o You can only make or change a program when the CD Player is stopped.
Using the Unit
1. Press the MENU button.
The TIMER section of the menu display blinks.
2. Press the cursor key to the right
or left (4 or ¢) and select
“CD P.MODE”.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the left (4 ) cursor key
Ô TIMER Ô CD P.MODE Ô REPEAT Ô AUTO EDIT Ô SEA CONTROL Ô
Press the right ( ¢) cursor key =
3. Press the cursor key to the up or
down (¡ or 1) and select
“PROGRAM”.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the up (¡ ) cursor key
Ô CONTINUE Ô PROGRAM Ô RANDOM Ô
Press the down ( 1) cursor key =
“PROGRAM” appears on the display.
4. Press the SET button.
The blinking “PROGRAM” display changes to
a steady display.
MENU
TAPE
TIMER
DAILY
1234
5678
TAPE
1234
5678
CD P. MODE
CONTINUE
TAPE
1234
5678
CD P. MODE
PROGRAM
SET
TAPE
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
CA-TD77R[EF]/EN/p26-52 97.7.24, 2:40 PM30