Filter
Top Products
Masterpage:Right+
Filename [TH-R1R3EK_10Subsidiary.fm]
Page 87Friday, 8 April 2005 16:00
TROUBLESHOOTING
87
Other Problems
] Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights off on the front display panel.
● The camcorder’s microphone is too close to the TV.
] Position the camcorder so its microphone is away from the TV.
● The TV’s volume is too high.
] Turn the TV’s volume down.
● Those channels have been designated to be skipped.
] If you need the skipped channels, restore them using AManual
Channel SetB. (A pg. 79)
● After the manual settings were made, Auto Channel Set was
performed.
] Do no perform Auto Channel Set after making manual settings,
proceed to perform AClock SetB (A pg. 81).
] Reset the unit by disconnecting the AC power plug from the AC
outlet and connect again.
The image of the TV broadcast appears distorted on the TV
screen.
Whistling or howling is heard from the TV during camcorder
recording.
When scanning channels, some of them are skipped over.
Channel settings that were made manually seem to have
changed or disappeared.
Malfunction occurs and the unit cannot be power off.
TH-R1R3EK_00.book Page 87 Friday, April 8, 2005 4:00 PM