Filter
Top Products
SUBSIDIARY SETTINGS
Page 82Friday, 8 April 2005 16:00
Filename [TH-R1R3EK_10Subsidiary.fm]
Masterpage:Left+
82
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select ADVD SET UPB, then press
ENTER.
3 Press selection keys to
select AUTILITYB, then
press ENTER.
4 Press selection keys to
select AFORMATB, then
press ENTER.
● The confirmation screen
appears.
5 Press selection keys to
select AYESB, then press
ENTER.
● The confirmation screen appears.
6 Press selection keys to select AOKB, then press ENTER.
7 Upon completing formatting, ACOMPLETEDB appears on the TV
screen. Press ENTER to complete formatting.
8 Press SET UP to return to the normal screen.
Format A DVD-RW Disc
1 Perform steps 1 - 3 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODEB, then press ENTER when ADISC WILL BE
FORMATTEDB appears on the TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3 Press selection keys to select AYESB, then press ENTER.
4 Upon completing formatting, ACOMPLETEDB appears on the TV
screen. Press ENTER to complete formatting.
5 Press SET UP to return to the normal screen.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles.
Format A Disc
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
● Load a DVD-RAM/RW disc to format.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
SET UP
(FGDE)
ENTER
DVD
Selection Keys
DVD SET UP FUNCTION SET UP INITIAL SET UP
LANGUAGE SET AUDIO OUTPUT UTILITY
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
FORMAT
FINALISE
CANCEL DISC FINALISATION
EXIT
OK
SELECT
SET UP
TH-R1R3EK_00.book Page 82 Friday, April 8, 2005 4:00 PM