Filter
Top Products
BASIC OPERATIONS ON DVD DECK
Page 28Friday, 8 April 2005 16:00
Filename [TH-R1R3EK_06DVD Operation.fm]
Masterpage:Left+
28
Slow Motion
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N).
● Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
● Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press and hold S or T for 2 or more seconds.
● Releasing the button resumes normal playback.
Skip Search
Press v during playback.
● Each press initiates an approximately 30 second period of fast-
motion playback. Normal playback resumes automatically.
● This function is not possible when playing back a Video CD using
the PBC function.
One Touch Replay
You can move back the playback position slightly.
Press w.
● Each press skips back for approximately 7 seconds and resumes
playback.
● This function is not possible when playing back a Video CD using
the PBC function.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
● Be sure to set ARESUMEB
to AONB or ADISC
RESUMEB. (A pg. 75)
1 Press o during playback to memorise a resume point.
● The unit enters Resume Stop mode and memorises the
position where you have stopped playback as a resume point.
ARESUMEB lights on the front display panel.
● The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 75)
●
To clear the resume points:
When ARESUMEB is set to AONB:
• Press AUDIO A to turn off the unit.
• Press
M to take out the disc.
• Press
o in stop mode.
• Press
TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press
MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
• ARESUMEB must be set to AOFFB. (A pg. 75)
• Press
o in stop mode.
• Press
TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press
MENU to display the disc menu, then start playback by
selecting an item, etc.
2 Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
● ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
finalised DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under AONB setting will be applied even if
ARESUMEB is set to ADISC RESUMEB. (A pg. 75)
● If you stop the playback of a disc for which a resume point has
already been memorised, the memory will be updated with the
new resume point.
● After the unit has memorised the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
● When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD/SVCDs.
● When ARESUMEB is changed to AONB or AOFFB (A pg. 75),
resume points of the discs memorised with ARESUMEB set to
ADISC RESUMEB will be cleared.
● Resume points are memorised for each side of a double-sided
disc.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
W
N/SLOW +
ANGLE
(FGDE)
ENTER
MARK
TOP MENU
REMAIN
SUBTITLE
MENU
S
T
M
AUDIO A
I
v
w
o
O/SLOW
-
Selection Keys
ATTENTION:
When a playback-only disc is played, pressing o once results in a
blue screen. To perform Resume Function with these discs, follow
the procedures as described below under the blue screen
condition.
DVD SET UP
AUTO TIMER
FUNCTION SET UP INITIAL SET UP
RESUME
VIDEO IN/OUT
OFF
ON
RECORDING SET
DISPLAY SET OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
EXIT
TH-R1R3EK_00.book Page 28 Friday, April 8, 2005 4:00 PM