Filter
Top Products
64
English
IMPORTANT:
To operate JVC’s video components using this remote control:
• Aim the remote control directly at the remote sensor on the VCR, DVD player or
TV, not on the receiver.
• Some JVC VCRs can accept two types of the control signals — remote code “A”
and “B.” Before using this remote control, make sure that the remote control
code of the VCR connected to the VCR jacks is set to code “A.”
VCR
You can always perform the following operations (with the
remote control mode selector set to “AUDIO/TV/VCR”):
VCR : Turns on or off the VCR.
After pressing VCR or VCR CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
PLAY: Starts playing.
REW: Rewinds a tape.
FF: Fast winds a tape.
STOP: Stops operations.
PAUSE: Pauses playing or recording temporarily. To
release it, press the PLAY button.
REC
¶¶
¶¶
¶: Press this button with the PLAY button to
start recording.
Press this button with the PAUSE button to
enter recording pause.
CHANNEL +/–: Changes the channels on the VCR.
1 – 9, 0: Selects the channels on the VCR.
For channel 5, press 5.
For channel 10, press 1, then 0.
DVD player
After pressing DVD or DVD MULTI (with the remote control mode selector set to
“AUDIO/TV/VCR”), you can perform the following operations on a DVD player:
PLAY: Starts playing.
44
44
4: Returns to the beginning of the current (or previous) track.
¢¢
¢¢
¢: Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE: Stops playing temporarily. To release it, press the PLAY button.
TV
You can always perform the following operations (with the
remote control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS : Turns on or off the TV.
TV VOLUME +/–: Adjusts the volume.
TV/VIDEO: Sets the input mode (either TV or VIDEO).
After pressing TV/DBS (with the remote control mode selector set to “AUDIO/TV/
VCR”), you can perform the following operations on a TV:
CHANNEL +/–: Changes the channels.
1 – 9, 0, 100+: Selects the channels.
RETURN: Alternates between the previously selected channel and the current
channel.
O
N
S
C
R
E
E
N
C
O
N
T
R
O
L
RM-SR774XU REMOTE CONTROL
/DBS
SOUND
CONTROL
CD
DISC
VCR
SLEEP
AUDIO
DVD MULTI
DVD TV/DBSVCR
CD
SEA
MODE
TEST
(REAR R)
REAR (L)
DELAY
TAPE/MD FM/AMPHONO
546
213
87/P 9
0
+10
10
AUDIO/TV
/VCR
SET EXIT
VCR TAPE
CONTROL
VOLUME
CHANNEL
MUTE
FF / ¢
PLAY
STOP
REC
TV/VIDEO
TV VOLUME
PAUSE
4 / REW
TV/CATV
CNTR
CNTR TONE
ENTER
MENU
EFFECT
CATV
/DBS
FM MODE/MUTE
100+
RETURN
SURROUND
MODE
T
U
N
I
N
G
U
P
T
U
N
I
N
G
D
O
W
N
M
E
N
U
Note:
You can use either the VCR
button or the VCR CONTROL
button to activate the buttons
listed to the left. If you press
VCR, the playing source also
changes. On the other hand, if
you press VCR CONTROL, the
playing source does not change.
After pressing DVD or DVD
MULTI (with the remote
control mode selector set to
the “AUDIO/TV/VCR”
position), these buttons can
be used for the DVD menu
operations.
Note:
For detailed menu operations,
refer to the instructions
supplied with the discs or the
DVD player.
REAR (L)
MENU
TEST
(REAR R)
546
213
87/P 9
CNTR
CNTR TONE
ENTER
EFFECT
EN47_72.RX-774P[U]/1 98.3.10, 2:56 PM64