Filter
Top Products
21
English
From the remote control:
Press one of the source selecting buttons directly.
DVD MULTI Select the DVD player for viewing the
digital video disc using the analog
discrete output mode (5.1CH
reproduction) on the DVD player.
Each time you press the button, the source
alternates between “DVD” and “DVD
MULTI.”
DVD Select the DVD player for viewing the stereo digital video disc player.
(“DVD MULTI” will be selected when the last mode for the DVD
playback has been the DVD MULTI playback mode.)
VCR Select the video component connected to the VCR jacks.
TV/DBS • Select the TV sound, when the remote control selector is set to
“AUDIO/TV/VCR.”
• Select the DBS tuner, when the remote control selector is set to
“CATV/DBS.”
CD* Select the CD player.
TAPE/MD* Select the cassette deck (or the MD recorder).
PHONO* Select the turntable.
FM/AM* Select an FM or AM broadcast.
Each time you press the button, the band alternates between FM and
AM.
Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another
component.
On the front panel:
1. Press SOUND SELECT briefly while viewing the picture from a
video component such as the VCR or DVD player, etc.
“SOUND SELECT” appears on the display.
2. Turn SOURCE SELECTOR to select the sounds (except the TV
sound), while the indication of the above step is still on the display.
From the remote control:
Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM/AM),
while viewing the picture from a video component such as the VCR or DVD player, etc.
Adjusting the Volume
On the front panel:
To increase the volume, turn MASTER VOLUME
clockwise.
To decrease the volume, turn it counterclockwise.
When you turn MASTER VOLUME rapidly, the volume
level also changes rapidly.
When you turn MASTER VOLUME slowly, the volume
level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
Note:
When you press one of the
source selecting buttons
marked above with an asterisk
(*), the receiver automatically
turns on.
DVD MULTI
DVD TV/DBSVCR
CD TAPE/MD FM/AMPHONO
Basic Operations
Notes:
• Once you have selected a
video source, pictures of the
selected source are sent to
the TV until you select another
video source.
• When you select TV sound as
the source, this function does
not work.
SOUND SELECT
SOURCE SELECTOR
–
+
VOLUME
–
+
MASTER VOLUME
CAUTION:
Always set the volume to the
minimum before starting any
source. If the volume is set at its
high level, the sudden blast of
sound energy can permanently
damage your hearing and/or
ruin your speakers.
Note:
The volume level can be
adjusted within the range of “0”
(minimum) to “90” (maximum).
EN20_46.RX-774P[U]/1 98.3.10, 2:50 PM21