Filter
Top Products
20
English
Basic Operations
The following operations are commonly used when you play any sound source.
IMPORTANT:
When using the Remote Control, check to see if its remote control
mode selector is set to the correct position:
To operate an audio system, TV, and VCR, set it to “AUDIO/TV/
VCR.”
To operate a CATV converter and DBS tuner, set it to “CATV/
DBS.”
Turning the Power On and Off (Standby)
On the front panel:
To turn on the power, press STANDBY/ON .
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power (into standby mode), press
STANDBY/ON again.
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO .
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power (into standby mode), press AUDIO again.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
Turn SOURCE SELECTOR until the source name you
want appears on the display.
As you turn the selector, the source changes as follows:
The selected source lamp also lights up.
For selecting DVD MULTI playback mode as the source:
Press DVD MULTI/2CH so that “DVD MULTI” appears on the display.
Each time you press the button, the DVD MULTI playback mode turns on and off, and
the “DVD” and “DVD MULTI” alternately appears on the display.
• Select “DVD” when you play back a disc in stereo or the audio output setting of the
DVD player is mixed to two front channels.
• Select “DVD MULTI” when you play back a disc on the DVD player with its analog
discrete output mode (5.1 CH reproduction) selected. To enjoy the DVD MULTI
playback mode, see page 44.
AUDIO/TV
/VCR
CATV
/DBS
STANDBY
STANDBY/ON
STANDBY
STANDBY/ON
AUDIO
Note:
Pressing the STANDBY/ON
button again turns off the power
(into standby mode) and lights
the STANDBY lamp. A small
amount of power is consumed
in standby mode. To turn the
power off completely, press the
POWER switch to set it in the
—
OFF position on the front
panel.
Current source name appears
Current volume level is shown
here
100 1k 10k
VOLUME
FM
VCR
PHONOCD TAPE/MD AM
DVD/DVD MULTITV SOUND/DBS
Selected source
name appears
CH–
CNTR
100 1k 10k
MUTE AUTO
VOLUME
THEATER DRAMA
LIVE CLUB ACTION
DANCE CLUB
HALL HEADPHONE
PAVILION
FR
L
S
C
D S P
3D-PHONC
LOUDNESS
SLEEP
R
S E A
Note:
When connecting an MD
recorder (to the TAPE/MD
jacks), and a DBS tuner (to the
TV SOUND/DBS jacks), change
the source name appears on the
display. See page 23 for details.
SOURCE SELECTOR
Source lamps on
the front panel
DVD
TV SOUND/DBS PHONO
TAPE/MDVCR
FM
AM
CD
EN20_46.RX-774P[U]/1 98.3.10, 2:50 PM20