Filter
Top Products
41
English
On the front panel:
You can also use the buttons on the front panel to adjust the Surround modes. However,
no test tone is available when using the buttons on the front panel. So, make adjustments
while listening to the sound of the source played back.
1. For Dolby Pro Logic:
Press DOLBY SURROUND so that the lamp on the
button lights up and “PRO LOGIC” appears on the
display.
The PRO LOGIC indicator also lights up.
Each time you press the button, the Dolby Pro Logic
mode turns on and off.
For Theater Surround:
1) Press DSP MODE.
The current DSP mode appears on the display.
2) Turn MULTI JOG until “THEATER” appears on
the display, while the indication of the previous
step is still on the display.
The PRO LOGIC, DSP and THEATER indicators
also light up on the display.
As you turn it, the DSP modes change as follows:
If you need to make any adjustment, go to the following steps.
2. If necessary, adjust the center speaker output level as
follows.
1) Press BALANCE/SURROUND ADJUST
repeatedly until “CENTER LEVEL” appears on
the display.
The display changes to show the current setting.
2) Turn MULTI JOG to adjust the center speaker
output level (from –10 dB to +10 dB), while the
indication of the previous step is still on the
display.
3. If necessary, adjust the rear speaker output level as
follows.
1) Press BALANCE/SURROUND ADJUST
repeatedly until “REAR LEVEL” appears on the
display.
The display changes to show the current setting.
2) Turn MULTI JOG to adjust the rear speaker
output level (from –10 dB to +10 dB), while the
indication of the previous step is still on the
display.
Notes:
• When you select “DVD MULTI”
as the source to play, you
cannot select the Surround
modes.
• The Surround mode is not
used with the other DSP
modes such as the DAP mode
and 3D-PHONIC mode. When
the Surround mode is turned
on, the other DSP mode, if
used, will be turned off.
Using the DSP Modes
DOLBY SURROUND
MULTI JOG
DSP MODE
HALL
DANCE CLUB
LIVE CLUBTHEATER
3D ACTION
HEADPHONE
3D DRAMA
PAVILION
3D THEATER
DSP OFF
BALANCE/SURROUND
ADJUST
MULTI JOG
Note:
You cannot adjust the center
speaker level when “CENTER
SPK” is set to “NONE” (see
page 24).
Notes:
• You cannot adjust the left and
right rear speaker output level
separately.
• You cannot adjust the rear
speaker level when “REAR
SPK” is set to “NO” (see page
25).
EN20_46.RX-774P[U]/1 98.3.10, 2:52 PM41