Filter
Top Products
29
English
Selecting the FM Reception Mode
On the front panel:
When an FM stereo broadcast is hard to receive or noisy, set the FM reception mode to
MONO. (When shipped from the factory, this mode has been set to AUTO.)
You can change the FM reception mode while receiving an FM broadcast.
Press FM MODE to select the FM reception mode.
Each time you press the button, the FM reception mode
alternates between AUTO and MONO.
AUTO: When a program is broadcasted in stereo, you will hear stereo
sound; when in monaural, you will hear monaural sounds. This
mode is also useful to suppress static noise between stations.
The MUTE AUTO indicator lights up on the display.
MONO: Reception will be improved although you will lose the stereo effect.
In this mode, you will hear noise while tuning into the stations.
The MUTE AUTO indicator goes off on the display.
From the remote control:
Press FM MODE/MUTE to select the FM reception mode.
Each time you press the button, the FM reception mode
alternates between AUTO and MONO.
FM MODE/MUTE
0
Note:
You can store the FM reception
mode for each preset station.
FM MODE
Note:
When using the FM MODE/
MUTE button, be sure that the
10 keys are activated for tuner,
not for the CD and others. (See
page 62.)
Receiving Radio Broadcasts
EN20_46.RX-774P[U]/1 98.3.10, 2:51 PM29