JVC RM-SR774XU Stereo Receiver User Manual


 
36
English
Using the DAP Modes
You can use five DAP modes — “Live Club, Dance Club, Hall, Pavilion, and
Headphones.”
Among the DAP modes, “Headphones” is very special. It can create the same stereo
sound as you listen through the speakers off air while listening to a source using
headphones. So, you can feel as if you were not using the headphones and listening to
music in a room.
On the front panel:
1. Press DSP MODE.
The current DSP mode appears on the display.
2. Turn MULTI JOG until the mode (LIVE CLUB,
DANCE CLUB, HALL, PAVILION, or
HEADPHONE) you want appears on the display,
while the indication of the previous step is still on the
display.
The DSP indicator also lights up on the display.
As you turn it, the DSP modes change as follows (the
indicator of the selected DSP mode also lights up on the
display):
LIVE CLUB: Gives the feeling of a live music club with a low ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL: Gives clear vocal and the feeling of a concert hall.
PAVILION: Gives the spacious feeling of a pavilion with a high ceiling.
HEADPHONE:
Gives a spacious stereo effect when listening with headphones.
DSP OFF
:
No DSP mode is applied.
For the other modes, see pages 34 and 39.
If you need to make any adjustment, go to the following steps.
3. Press BALANCE/SURROUND ADJUST repeatedly
until “REAR LEVEL” appears on the display.
The display changes to show the current setting.
4. Turn MULTI JOG to adjust the rear speaker output
level (from –10 dB to +10 dB), while the indication of
the previous step is still on the display.
Notes:
When you select “DVD MULTI”
as the source to play, you
cannot select the DAP modes.
The DAP mode is not used
with the other DSP modes
such as the Dolby Pro Logic
and 3D-PHONIC mode. When
the DAP mode is turned on,
the other DSP mode, if used,
will be turned off.
MULTI JOG
DSP MODE
HALL
DANCE CLUB
LIVE CLUBTHEATER
3D ACTION
HEADPHONE
3D DRAMA
PAVILION
3D THEATER
DSP OFF
Note:
When you select
“HEADPHONE” (the
HEADPHONE indicator lights
up), you cannot go to the
following steps. No adjustments
can be made for
“HEADPHONE.”
Notes:
You cannot adjust the left and
right rear speaker output level
separately.
You cannot adjust the rear
speaker level when “REAR
SPK” is set to “NO” (see page
25).
BALANCE/SURROUND
ADJUST
MULTI JOG
Continued to the next page.
EN20_46.RX-774P[U]/1 98.3.10, 2:51 PM36