JVC RM-SR774XU Stereo Receiver User Manual


 
45
English
MULTI JOG
4. Turn MULTI JOG to adjust the center speaker
output level (from –10 dB to +10 dB), while the
indication of the previous step is still on the display.
5. Press BALANCE/SURROUND ADJUST repeatedly
until “REAR L LEVEL” appears on the display.
The display changes to show the current setting.
6. Turn MULTI JOG to adjust the left rear speaker
output level (from –10 dB to +10 dB), while the
indication of the previous step is still on the display.
7. Press BALANCE/SURROUND ADJUST repeatedly
until “REAR R LEVEL” appears on the display.
The display changes to show the current setting.
8. Turn MULTI JOG to adjust the right rear speaker
output level (from –10 dB to +10 dB), while the
indication of the previous step is still on the display.
9. Press BALANCE/SURROUND ADJUST repeatedly
until “CENTER TONE” appears on the display.
The display changes to show the current setting.
10. Turn MULTI JOG to select the center tone level,
while the indication of the previous step is still on the
display.
The center tone level affects the mid-frequency range,
which the human voice is mostly made up of.
As you turn it, the display changes to show the
following:
To make the dialogue clearer, select “SHARP1” (little) or “SHARP2” (much).
To make the dialogue softer, select “SOFT1” (little) or “SOFT2” (much).
When “FLAT” is selected, no adjustment is applied.
Using the DVD MULTI Playback Mode
SHARP1 SHARP2FLATSOFT2 SOFT1
BALANCE/SURROUND
ADJUST
MULTI JOG
BALANCE/SURROUND
ADJUST
MULTI JOG
BALANCE/SURROUND
ADJUST
MULTI JOG
Note:
You cannot adjust the left rear
speaker level when “REAR SPK”
is set to “NO” (see page 25).
Note:
The center tone cannot be
adjusted when “CENTER SPK”
is set to “NONE” (see page 24).
Note:
You cannot adjust the right rear
speaker level when “REAR SPK”
is set to “NO” (see page 25).
EN20_46.RX-774P[U]/1 98.3.10, 2:52 PM45