64
General Notes
In general, you will have the best performance by keeping your discs
and mechanism clean.
• Store discs in their cases, and keep them in cabinets or on shelves.
Handling Discs
• Remove the disc from its case by holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when placing it
back in its case.
• Avoid exposure to direct sunlight, temperature extremes, and
moisture.
To get the best performance of the system, keep your discs and mechanism clean.
Cleaning Discs
Wipe the disc with a soft cloth in a straight line from center to edge.
DO NOT use any solvent—such as conventional record
cleaner, spray, thinner, or benzine—to clean the disc.
Cleaning the Unit
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily stained,
wipe it with a cloth soaked in water-diluted neutral detergent and
wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become damaged or get
its paint peeled off, be careful about the following.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
— DO NOT wipe it with thinner or benzine.
—
DO NOT apply any volatile substances such as insecticides to it.
— DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Maintenance
EN57-68RX-DV3SL[J]f.pm5 02.4.19, 16:0364