Filter
Top Products
16
Basic DVD Player Operations
4
Adjust the Volume
For details, see “Basic Operations” on page 11.
5
Activate Realistic Sound Field
You can activate Surround mode for making realistic sound field.
• You can activate Surround mode automatically when the digital
multichannel source (Dolby Digital or DTS Digital Surround
software), or 2-channel matrix source (Dolby Surround software)
is played back—Auto Surround (see page 22).
When you activate or deactivate Surround mode manually, do the
following procedures:
On the front panel:
Press SURROUND ON/OFF.
From the remote control:
1) Press SOUND.
2) Press SURR ON/OFF.
• Each time you press SURROUND ON/OFF on the front panel or
SURR ON/OFF on the remote control, Surround mode is activated
and deactivated alternately.
6
Select Surround Mode
When the PRO LOGIC II or DSP indicator is lit, you can select
various Surround modes (see page 27).
Press SURROUND MODE (REC MODE) on the
front panel or SURR MODE on the remote control.
•
When you enjoy digital multichannel source such as Dolby Digital
or DTS Digital Surround software, you cannot change Surround
mode. When you enjoy Dolby Digital or DTS Digital Surround 2-
channel including 2-channel matrix source such as Dolby Surround
software, you can select Surround mode from between PRO
LOGIC II MOVIE and PRO LOGIC II MUSIC (see page 27).
7
Stop Playback
Press 7.
Playback stops.
The unit memorizes the point where you stop playback and the
RESUME indicator lights up on the display (except when an audio
CD is loaded).
While the RESUME indicator is lit on the display, you can start
playback from the memorized point by pressing 3—Resume play.
About Resume play
This unit can memorize the point when you operate the following
procedures:
• Pressing 7 during playback—Pressing 3 starts Resume play
• Changing the source—Pressing DVD or 3 starts Resume play
• Turning off the unit (including Sleep Timer)
—Pressing 3 starts Resume play
Once you start Resume play, the RESUME indicator goes off
(the unit clears the memorized point).
The unit also clears the memorized point when you operate the
following procedures:
• Starting Resume play
• Pressing 7 (while the RESUME indicator is lit on the display)
• Selecting a track by pressing ¢ or 4 for video CD and
super VCD when playback stops
• Selecting program or random playback
• Pressing TOP MENU
• Ejecting the loaded disc
• Turning on the unit by pressing
STANDBY/ON on the
front panel or STANDBY/ON AUDIO on the remote
control.
You can cancel Resume play (see “OTHERS menu” on page 52).
To remove the loaded disc
Press 0.
The disc tray opens.
To close the disc tray
Press 0 again.
8
Turn Off the Power (into Standby)
Press STANDBY/ON on the front panel or
STANDBY/ON AUDIO on the remote control.
The unit is turned off and the STANDBY lamp lights up on the front
panel.
• If you press the button while the disc tray is open, the disc tray
closes automatically, then the unit is turned off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
On the front panel From the remote control
FM MODE
On the front panel From the remote control
MASTER VOLUME
+
–
VOLUME
ON/OFF
SURROUND
MODE
REC MODE
SOUND
7
SURR ON/OFF
On the front panel From the remote control
ON/OFF
SURROUND
MODE
REC MODE
10/0
SURR MODE
STANDBY
STANDBY/ON
VCRDBS TV AUDIO
STANDBY/ON
On the front panel From the remote control
EN15-18RX-DV3SL[J]f.pm5 02.4.19, 16:0016