Filter
Top Products
63
Operating Other Manufacturers’ Equipment
7 To change the transmittable signals for
operating other manufacturers’ VCR
1. Press and hold
STANDBY/ON VCR.
2. Press VCR.
3. Enter the manufacturer’s code
using number buttons (1–9, 0).
See the right to find the code.
4. Release STANDBY/ON VCR.
You can turn on and off the VCR:
STANDBY/ON VCR : Turns on or off the VCR.
After pressing VCR, you can perform the following operations
on a VCR:
1 – 9, 0 : Selects the TV channels on a VCR.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
TV RETURN will function as the ENTER button if
your equipment requires pressing ENTER after
selecting a channel number.
3 : Starts playing.
REW : Rewinds a tape.
FF : Fast-winds a tape.
7 : Stops operations.
8 : Pauses playing. To release it, press 3.
Note:
• Refer also to the manual supplied for your VCR.
VCRDBS TV AUDIO
STANDBY/ON
231
564
89
7
10/0 +10
100+
EFFECT
TEST
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
CENTER
REAR·L
REAR·R
VCRDBS DVD
TAPETV CDR FM/AM
Manufactures’ codes for VCR
Manufacturer Codes
JVC 00*, 26 – 29, 58
Aiwa 01, 02
Bell & Howell 03
Blaupunkt 04, 05
CGM 06, 07
Emerson 08, 10 – 12, 64, 65
Fisher 03, 14 – 17
Funai 01
GE 18 – 20
Goldstar 07
Goodmans 13, 21
Grundig 06, 22
Hitachi 18, 23 – 25, 66
Loewe 07, 21
Magnavox 04, 19, 24
Mitsubishi 30 – 35
NEC 26, 27
Nokia 03, 36
Nordmende 38
Orion 09
Panasonic 19, 24, 39, 40
Philips 04, 19, 21, 24, 41, 42
Phonola 21
RCA/PROSC 04, 18, 19, 23, 24, 43 – 45
SABA 38, 46
Samsung 45, 47, 59, 61 – 63
Sanyo 03, 48, 49
Sharp 37, 50
Siemence 03, 51
Sony 52 – 54
Telefunken 55, 60
Toshiba 43, 44
Zenith 56, 57
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
*“00” is the initial JVC code.
5. Try to operate your VCR by pressing
STANDBY/ON VCR.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
EN57-68RX-DV3SL[J]f.pm5 02.4.19, 16:0363