Filter
Top Products
59
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the
remote control.
Operating Audio Components
To operate JVC’s audio components using this remote control
• Aim the remote control directly at the remote sensor on the unit.
• To operate a source with the remote control, the source must be
selected using the source selecting buttons on the remote control.
• Refer also to the manuals supplied with your components.
7 Sound control section (Amplifier)
After pressing SOUND, you can perform the following operations:
SURR ON/OFF : Turns on or off the Surround modes—
Dolby Digital, DTS Surround, and Dolby
Pro Logic II.
SURR MODE : Selects the Surround modes.
TEST : Turns on or off the test tone output.
CENTER + or – : Adjusts the center speaker channel output
level.
REAR•L + or – : Adjusts the left rear speaker channel
output level.
REAR•R + or – : Adjusts the right rear speaker channel
output level.
SUBWOOFER + or – : Adjusts subwoofer channel output level.
EFFECT : Selects the effect level.
Note:
• After adjusting sounds, press the source selecting button to operate
your target source by using number buttons; otherwise, number
buttons cannot be used for operating your target source.
7 CD recorder
After pressing CDR, you can perform the following operations on a CD
player and a CD recorder:
3 : Starts playing.
4 : Returns to the beginning of the current (or previous)
track.
¢ : Skips to the beginning of the next track.
7 : Stops playing.
8 : Pauses playing. To release it, press 3.
1 – 10, +10 : Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
• When you start recording on the CD recorder, use the buttons on
the CD recorder itself or on the remote control supplied with it.
231
564
89
7
VFP
10/0 +10
100+ TV RETURN
VCRDBS DVD
TV/VIDEO REW/
(
TUNING
9
/FF
REPEAT SLEEP
TAPETV CDR FM/AM
FM MODE STROBE
EFFECT
– TV/DBS CH +
ANALOG
/DIGITAL
TEST
AUDIO
INPUT
SUBTITLE
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
SOUND
CENTER
REAR·L
REAR·R
7 Tuner
You can always perform the following operations:
FM/AM : Tunes into the last selected FM or AM station.
• Each time you press the button, the band changes between FM and
AM alternately.
After pressing FM/AM, you can perform the following operations on
a tuner:
1 – 10, +10 : Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
TUNING 9 or ( : Tunes into stations.
FM MODE : Changes the FM reception mode.
231
564
89
7
VFP
10/0 +10
100+ TV RETURN
VCRDBS DVD
TV/VIDEO REW/
(
TUNING
9
/FF
REPEAT SLEEP
TAPETV CDR FM/AM
FM MODE STROBE
EFFECT
– TV/DBS CH +
ANALOG
/DIGITAL
TEST
AUDIO
INPUT
SUBTITLE
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
SOUND
CENTER
REAR·L
REAR·R
PROGRESSIVE
231
564
89
7
VFP
10/0 +10
100+ TV RETURN
EFFECT
– TV/DBS CH +
ANALOG
/DIGITAL
TEST
AUDIO
INPUT
SUBTITLE
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
SOUND
CENTER
REAR·L
REAR·R
EN57-68RX-DV3SL[J]f.pm5 02.4.19, 16:0359