Filter
Top Products
61
Operating Other Manufacturers’ Equipment
This remote control supplied with the unit can transmit control signals for other manufacturers’ TVs, DBS tuners, and VCRs.
By changing the transmittable signals from preset ones to other manufacturers’, you can operate other manufacturers’ components using this
remote control.
Changing the Preset Signal Codes
To operate other manufacturers’ equipment using this remote
control
• Aim the remote control directly at the remote sensor on each
equipment.
• To operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.
• Refer also to the manuals supplied with your equipment.
7 To change the transmittable signals for
operating other manufacturers’ TV
1. Press and hold
STANDBY/ON TV.
2. Press TV.
3.
Enter the manufacturer’s code
using the number buttons (1–9, 0).
See the right to find the code.
4. Release STANDBY/ON TV.
You can perform the following operations on the TV:
STANDBY/ON TV :Turns on or off the TV.
TV VOL + or – : Adjusts the volume.
TV/VIDEO : Sets the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on
a TV:
TV/DBS CH + or – : Changes the channels.
1 – 9, 0, 100+ : Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+,
3, then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
VCRDBS TV AUDIO
STANDBY/ON
VCRDBS DVD
TAPETV CDR FM/AM
231
564
89
7
10/0 +10
100+
EFFECT
TEST
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
CENTER
REAR·L
REAR·R
Notes:
• Refer also to the manual supplied for your TV.
• All the functions listed above may not be assigned to the
buttons for some TVs.
• If you cannot change the channels of some TVs by pressing
the number buttons, press TV/DBS CH + or – for changing the
channels.
5. Try to operate your TV by pressing
STANDBY/ON TV.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturer Codes
JVC 00*, 02, 13, 14, 47, 74
Akai 01, 02
Blaupunkt 03, 04
Fisher 01, 05
Grundig 03, 06, 07
Hitachi 08 – 10, 49
Iraddio 02
Itt/Nokia 11, 12
Loewe 06, 15, 16
Magnavox 08, 17, 49
Mets 50 – 53
Mitsubishi 08, 18 – 20
Mivar 21
Nordmende 22, 23
Okano 15
Panasonic 24 – 27, 76
Philips 15, 17, 28, 75
Quelle 52 – 67
RCA/PROSC 08, 24, 29 – 31, 48
SABA 32, 33, 68 – 70
Samsung 06, 08, 16, 34, 35, 49
Sanyo 01, 05
Schneider 02, 15, 36
Sharp 37, 38, 77
Sony 39
Telefunken 40 – 42, 69
Thomson 71, 72
Toshiba 37, 43, 44
Zenith 45, 46
Manufactures’ codes for TV
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
*“00” is the initial JVC code.
EN57-68RX-DV3SL[J]f.pm5 02.4.19, 16:0361