Filter
Top Products
28
Adjusting Surround Mode
Using Remote Control
When playing back the source with Surround mode, you can adjust
the speaker output levels for Surround modes.
Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• You can also adjust Surround modes using the Choice menu (see
pages 47 to 52) or buttons on the front panel (see page 24).
• When using test tone, you can adjust the speaker output level
without playback sounds.
1
Select and play back software you like.
2
Activate and select Surround mode.
• When 2-channel source is played back, you can select
Surround modes.
3
Adjust the sound.
1) Press SOUND.
Number buttons now work for the sound adjustment.
If you do not want to use the test tone, go to step
3
–3).
2) Press TEST.
Playback is stopped.
“TEST L” starts flashing on the display and a test tone
comes out of the speakers in the following order:
TEST CENTER REAR•L REAR•R EFFECT
Dolby Digital ⅜⅜⅜⅜ן
DTS ⅜⅜⅜⅜ן
Dolby Pro Logic II ⅜⅜⅜⅜ן
DAP ⅜ן⅜⅜⅜
All Channel Stereo ⅜⅜⅜⅜ן
Note:
• You cannot adjust the speakers which are not used by the selected Surround mode.
Creating Realistic Sound Fields
231
564
89
7
VFP
10/0 +10
100+ TV RETURN
EFFECT
– TV/DBS CH +
ANALOG
/DIGITAL
TEST
AUDIO
INPUT
SUBTITLE
SURR ON/OFF
SURR MODE
DIMMER
–
SUBWOOFER
+
SOUND
CENTER
REAR·L
REAR·R
PROGRESSIVE
Notes:
• You can adjust the speaker output levels without the
test tone.
• No test tone comes out of the speaker when its
speaker information is set to “NO.”
3) Adjust the speaker output level as follows:
To adjust center speaker, press CENTER +/–.*
To adjust left rear speaker, press REAR•L +/–.
To adjust right rear speaker, press REAR•R +/–.
To adjust the effect level, press EFFECT.**
The name for the item currently adjusted appears on the
display. For details, see the illustrations of “Speaker output
level” on page 24.
Notes:
• You can adjust the speaker output level for the
activated speakers ONLY (the speaker indicators are
lit on the display).
*
You cannot adjust the output level of center speaker
when one of DAP modes is activated.
**
You can adjust the effect level only when one of DAP
modes is activated.
4) Press TEST to stop the test tone.
The test tone stops.
• When no operation is done, the test tone stops
automatically about 1 minute.
Note:
• Before operating the DVD player using remote
control, press DVD to change the remote control
operation mode to DVD.
⅜: Possible ן: Impossible
Relation between Surround modes and adjustable items
(
Left front speaker
)
(
Left rear speaker
)(
Right rear speaker
)
(
Center speaker
)(
Right front speaker
)
Item
Mode
EN25-28RX-DV3SL[J]f.pm5 02.4.19, 16:0128