Filter
Top Products
49
Timer
8 Press [F AUDIO] to turn off the
main unit.
• The playback timer is available only when
the main unit is off.
NOTE
• Turn off the main unit by at least 1 minute prior to
the starting time you have selected in step 3.
• While setting the playback timer, you can return
to the previous step by pressing [CANCEL] or
you can stop the setting by pressing [CLOCK/
TIMER].
• When the playback starts, the volume gradually
increases to the selected level.
• You can make a variety of playback settings by
combining the playback timer and the settings
for program playback, random playback or
repeat playback. (Refer to pages 31-33.)
• When “LINE1” is selected as the source and “QP
LINK ON” is selected, the playback timer acti-
vates even if the main unit is turned on. (Refer to
page 46.)
1 Press [CLOCK/TIMER].
2 Press [CANCEL].
NOTE
• Even after you cancel the playback timer, the
setting remains stored.
1 Press [CLOCK/TIMER].
2 Press [ENTER].
• The current playback timer setting appears
in the display window.
3 Press [F AUDIO] to turn off the
main unit.
NOTE
• When the power cable of the main unit is discon-
nected from the AC outlet or the power is inter-
rupted, the clock and the playback timer settings
may be lost. If the settings are lost, set the clock
and playback timer again.
1 Press [CLOCK/TIMER].
2 Press [ENTER].
• Each of the playback timer settings are dis-
played in turn every 2 seconds.
Set the playback timer again from the
start.
• Refer to steps 1 - 8 on pages 48 and 49.
The indicator lights up when the playback
timer is activated.
Canceling the playback timer
Activating the playback timer again
Confirming the playback timer
settings
Changing the playback timer
settings
Timer (continued)
For the locations of the remote
control buttons, refer to page 47.
EX-A3[A_Ux]-09.fm Page 49 Tuesday, December 12, 2006 9:56 AM