Filter
Top Products
27
Basic operations of disc/file playback
■When a disc/file is played back
Press 7.
When playback is stopped in the middle, playback
can be started from the stopped position.
■When a disc/file is played back
Follow any of the operations below.
*1 “RESUME” is displayed in the display window.
If
7 is pressed twice, the position where
playback has been stopped is cleared.
*2 After this operation, the position where playback
has been stopped is stored even when the main
unit is turned off by pressing [F AUDIO].
Press [DVD/CD
3
] or [USB MEMORY
3
].
NOTE
• This function does not work in program playback
or random playback.
• The stored position is cleared if the disc tray is
opened or the USB mass storage class device is
disconnected.
• You can deactivate the resume playback func-
tion. (Refer to “RESUME” on page 43.)
• When a file on the USB mass storage class
device is selected as the source, this function
may not work as explained above.
Guide icons on the TV screen (on-screen
guide)
: Containing multi-view angles (Refer to
page 34.)
: Containing multi-audio languages
(Refer to page 34.)
: Containing multi-subtitle languages
(Refer to page 34.)
: The disc/file cannot accept the opera-
tion you have attempted.
: Play
: Pause
: Fast reverse/fast forward search
:
Slow motion playback (reverse/
forward directions)
Messages on the TV screen
When a DVD VIDEO or an USB mass storage
class device is selected as the source, the mes-
sages shown below are displayed on the TV
screen to indicate its status.
NOW READING:
Appears when the main unit is reading the disc/
file information. Wait for a short time.
REGION CODE ERROR!:
Appears when the region code of the disc does
not match the code supported by the main unit.
(Refer to page 53.)
NO DISC:
Appears when no disc is loaded.
NO USB DEVICE:
Appears when a USB mass storage class
device is not connected.
OPEN:
Appears when the disc tray is opening.
CLOSE:
Appears when the disc tray is closing.
CANNOT PLAY THIS DISC:
Appears when attempting to play back an
unplayable disc.
CANNOT PLAY THIS DEVICE:
Appears when there are no playable files on a
USB mass storage class device.
Stopping playback
Resuming playback
Press 7 once.
*1 *2
Press [F AUDIO] to turn off the main unit.
Select a source other than the disc/file.
*2
Temporarily stopping playback
Starting playback from the stored
position
Basic operations of disc/file playback (continued)
EX-A3[A_Ux].book Page 27 Monday, December 11, 2006 1:44 PM