Filter
Top Products
Listening to radio broadcasts
20
2 Press [ TUNING] or [ TUNING]
repeatedly to select a radio station
(frequency).
• When the main unit has received an FM ste-
reo broadcast, the “ST” (stereo) indicator
lights up in the display window.
• You can also select a radio station using
automatic tuning.
■ Automatic tuning:
Hold down [ TUNING] or [ TUNING] until
the frequency starts changing, and then
release the button.
• When the main unit has received a broad-
cast, the frequency automatically stops
changing.
• You can select a specific radio station while
searching for a broadcast. Press [ TUN-
ING] or [ TUNING] to stop automatic tun-
ing when the desired frequency appears in
the display window.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear the
broadcast more easily by pressing [PLAY/
TUNER MODE] to switch the sound to monaural
reception. In this case, the “MONO” (monaural)
indicator lights up in the display window. To
return the sound to stereo reception, press
[PLAY/TUNER MODE] again.
• If a beeping sound disturbs your AM broadcast,
you can reduce the noise. Pressing [PLAY/
TUNER MODE] displays “AM BEAT CUT” in the
display window for a short time and reduces the
noise.
Presetting radio stations in the main unit allows
you to easily tune in to a radio station.
You can store up to 30 FM radio stations and up to
15 AM radio stations.
1 Select a radio station you want to
store.
• Refer to “Selecting a radio station” on page
19.
2 Press [ENTER].
• The preset number flashes in the display
window for approximately 5 seconds.
3 While the preset number is flash-
ing, press [PRESET
]
or
[PRESET
]
to select the preset
number you want to use.
• You can also select the preset number by
using the number buttons.
4 Press [ENTER] while the selected
number is flashing.
• “STORED” appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset num-
ber to which another radio station has previously
been stored, the newly set radio station replaces
the previously stored radio station.
■When an FM or AM radio broadcast is
selected as the source
Press the number buttons to select
the preset number of the radio station
to which you want to tune in.
• You can also select the preset number by press-
ing [PRESET ] or [PRESET ].
Tuning in to a preset radio
station
Presetting radio stations
Tuning in to a preset radio station
EX-A3[A_Ux].book Page 20 Monday, December 11, 2006 1:44 PM