Filter
Top Products
28
To tune in a preset station
On the front panel:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button lights
up. The last received station of the selected band is
tuned in.
• Each time you press the button, the band
alternates between FM and AM.
2. Press FM/AM PRESET 5 or ∞
until you find the channel you
want.
• Pressing FM/AM PRESET 5 increases the
number.
• Pressing FM/AM PRESET ∞ decreases the
number.
From the remote control:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button lights
up. The last received station of the selected band is
tuned in.
• Each time you press the button, the band
alternates between FM and AM.
2. Press the 10 keys to select a
preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10
then 5.
• For channel number 20, press +10
then 10.
• For channel number 30, press +10, +10,
then 10.
Note:
When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 51.)
FM/AM
FM/AM PRESET
On the front panel From the remote control
FM MODE
0
∗
SBACK•L
FM MODE
FM / AM
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
AUTO MUTING
ANALOG
VOLUME
TUNED
L R
SPEAKERS
1
231
564
89
7/P
0
+1010
BOOST
∗
FRONT•L
MENU
ENTER
∗
FRONT•R
BASS
TEST
∗
CENTER
∗
SUBWFR
∗
DIGITAL EQ
∗
SBACK•L
∗
SBACK•R
∗
SURR•L
∗
SURR•R
RETURN FM MODE 100
+
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station (see
page 27).
While listening to an FM station, press FM MODE.
• Each time you press the button, the FM reception mode alternates
between “FM AUTOMUTING” and “FM MODE MONO.”
FM AUTOMUTING: Normally select this.
When a program is broadcasted in
stereo, you will hear stereo sound;
when in monaural, you will hear
monaural sounds. This mode is also
useful to suppress static noise between
stations. The AUTO MUTING indicator
lights up on the display. (Initial setting)
FM MODE MONO: Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The STEREO indicator also
goes off.)
EN27-29.RX-8020V[J]_f 02.3.20, 11:33 AM28