Filter
Top Products
44
English
TEXT COMPU LINK Remote Control System
The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in the
CD Text
*
and MDs. Using these information in the discs, you can operate a CD player or MD recorder equipped with
the TEXT COMPU LINK remote control system through the receiver.
Functions:
This remote control system allows you to use the functions listed
below.
Showing the Disc Information on the TV screen
Disc information such as its performer and disc title (and track titles
only when a CD Text is selected) is shown on the TV screen.
Searching for a Disc: Only for the CD Player
This remote control system can allow you to search for discs by the
performer, disc title, and music genre.
With this disc search, you can easily find the disc you want to play.
Entering the Disc Information
If your CD player or MD recorder has the disc memory function,
you can input the following information about the normal audio CDs
or MDs on the TV screen.
• For CDs: Performer, disc title, and music genre
• For MDs: Disc title and song titles
*
What is a CD Text?
In a CD Text, some information about the disc (its disc title, performer,
composer, arranger, etc.) is recorded.
Notes:
• If your audio component has two COMPU LINK jacks, you can use
either one. If it has only one COMPU LINK jack, connect it so that it
is the last item in the series of components. (For example, the CD
player in the diagram in the left column.)
• If your audio component has two TEXT COMPU LINK jacks, you
can use either one. If it has only one TEXT COMPU LINK jack,
connect it so that it is the last item in the series of components. (For
example, the CD player in the diagram in the left column.)
•“TEXT COMPULINK SOURCE NOT CONNECTED” appears on the
display in the following cases:
– When the connections explained in the left column are not
correctly done.
– When you try to use the TEXT COMPU LINK function a few
seconds after you turn on the connected equipment.
This is not a malfunction of the units.
• Refer also to the manuals supplied with your CD player or MD
recorder.
IMPORTANT:
If you turn on the receiver before turning on the other components
after connecting the components, the TEXT COMPU LINK remote
control system does not work correctly.
If this happens:
1. Turn off all the components including this receiver.
2. Turn on the connected components.
3. Turn on this receiver.
Connections:
To use this remote control system, you need to connect a CD player
and/or MD recorder you want to operate, following the procedures
below.
1. If you have already plugged your CD player, MD
recorder, and this receiver into the AC outlets,
unplug their AC power cords first.
2. Connect your CD player, MD recorder, and this
receiver as follows, through the COMPU LINK
jacks and TEXT COMPU LINK jacks.
1) COMPU LINK jacks: Use the cables with the monaural
mini-plugs (not supplied with this receiver).
2) TEXT COMPU LINK jacks: Use the cables with the
stereo mini-plugs (not supplied with this receiver).
3. Connect your CD player, MD recorder and this
receiver, using the cables with RCA pin plugs (see
page 9).
4. Plug the AC power cords of these components
into the AC outlets.
5. Turn on the connected components first, then
turn on this receiver.
COMPU LINK – 4
(SYNCHRO)
CD player
MD recorder
TEXT
COMPU LINK
CD player
MD recorder
EN43-48.RX-8020V[C]_f 02.4.3, 0:29 PM44