JBL DSC 1000 Home Theater System User Manual


 
25
ENGLISH
TROUBLESHOOTING (CONTINUED)
The remote does not function.
• Remove any obstacles between the
remote control and the system.
• Move the remote control closer to
the system.
• Point the remote control at the
remote sensor on the front panel.
• Replace all the batteries in the
remote control with new ones if they
are weak.
• Check that the batteries are loaded
correctly.
The disc does not play.
• There is no disc inside. (“NO DISC”
appears on the front panel display
and the TV screen.) Insert a disc.
• Insert the disc correctly with the
playback side facing down on the
disc tray.
• Clean the disc.
• The system cannot play CD-ROM's,
etc. (see page 8).
• DVD with wrong region code
(see page 8).
The system starts playing the DVD
automatically.
• The DVD features the auto playback
function.
Playback stops automatically.
• Some discs include an auto pause
signal. When playing such a disc, the
system stops playback at the signal.
Track Skip or direct select with
numeric buttons, Search, Slow-
motion play, repeat play or Program
play, etc., cannot be done.
• Depending on the DVD, some of the
above operations may not be
available (Playback control with
DVD).
Messages do not appear on the TV
screen in the language you want.
• Select the language for OSD in the
SETUP menu (see page 14).
For all messages from the DVD (DVD
menu, subtitles) in the proper
language the disc must have the
language you selected, if not,
another language will be selected.
The audio language cannot be
changed when you play a DVD.
• Multilingual sound is not recorded on
the DVD.
• Changing the language for the sound
is prohibited on the DVD.
The subtitle language cannot be
changed when you play a DVD.
• Multilingual subtitles are not
recorded on the DVD.
• Changing the language for the
subtitles is prohibited on the DVD.
The subtitles cannot be turned off
when you play a DVD.
• Depending on the DVD, you may not
be able to turn the subtitles off.
The angles cannot be changed when
you play a DVD.
• Multi-angles are not recorded on
most DVDs.
• Change the angles when the angle
mark appears on the TV screen.
• Changing the angles is prohibited on
some DVDs.
The system does not operate
properly.
• Static electricity, etc., may affect the
system’s operation.
Disconnect the AC power cord, then
connect it again.
Please also refer to the Trouble-
shooting guide contained in your
loudspeaker Owners Manual