Filter
Top Products
14
ENGLISH
SYSTEM SETUP
System Defaults
The final step of the installation is to
establish the system’s defaults. It is
helpful to take a few minutes to famili-
arize yourself with these settings, as
they may require change before the
first use and later from time to time.
General Functionality of the
OSD Menu
The complete setup and control of the
DSC 1000 takes place in an advanced
user-guided On Screen Display (OSD)
menu system. The OSD can be acti-
vated by pressing the OSD button on
the remote control. Pressing this
button again de-activates the OSD.
The main menu consists of a PLAYER
Menu, RADIO Menu, TV Menu, AUX
Menu, DIGITAL Menu and a SET-UP
Menu. The PLAYER Menu will show all
information and options available for
the disc currently playing. The RADIO
Menu will show radio and RDS
options. The TV, AUX and DIGITAL
Menus show the surround options for
these specific audio inputs. The SET-
UP Menu will help you configure all
audio and video settings which are
normally only made once.
Each Main Menu contains Submenus.
These submenus are shown as icons
on the left side of the menu. They can
be highlighted by a white square
around the icon by moving the cursor
with the ARROW buttons. Icons can
be activated by pressing ENTER when
an icon is highlighted. When ENTER
has been pressed, the color of the
icon will change to dark blue and you
will see that the current settings of
this submenu will appear on the right
side of the menu.
Although each Menu has various
Submenus and Settings, they are all
navigated in the same way. All sub-
menus, settings and options can be
accessed with the help of the ARROW
(
KLNM
) and ENTER buttons on the
remote control.
To change a setting, simply move the
cursor to the setting you wish to
change. This setting will be high-
lighted in light blue, and a brief expla-
nation will appear in the Upper Menu
Line on the bottom of your screen,
together with the available options for
this setting on the Lower Menu Line.
Move the ARROW
M
/
N
buttons to the
requested option for this setting. Press
ENTER to activate the new setting.
(A) Main Menu Line
(B) Submenus
(C) Current Settings
(D) Upper Menu Line with Brief
Explanation
(E) Lower Menu Line with Possible
Options
Set Up Menu
The first step in checking or changing
the system defaults is to access the
Setup Menu. First, make certain that
the DSC Controller is properly connec-
ted to a video display, and that power
is connected. For this process, how-
ever, you do not need to load a disc
into the unit.
During STOP, PAUSE or PLAY mode, if
you press OSD on the remote, the Main
Menu appears on the screen.
This Main Menu and all menus in the
following section may look different,
listing the settings with different
languages, depending on the settings
made previously. With the factory
default setting all languages are set to
”English”, that´s why with all menus
the English version is shown in the
manual.
In the SET-UP Menu you will find
submenus for making or changing all
settings and adjustments for both
Audio and Video handling of your
DSC 1000.
(B)
(A)
(C)
(E) (D)
To access the SET-UP Menu, press
the OSD button, and move the cursor
to the right until SET-UP is highlighted.
Press ENTER to activate the SYSTEM
Settings:
System Settings
The System Setting Submenu contains
the following settings. Follow the
explanations in the Upper Menu Line
on the bottom of your screen to
change the settings.
Display Language: Sets the language
in which the OSD menus are shown
on your screen.
Preferred Subtitle Language: Defines
your preferred subtitle language.
Every time a disc contains this subtitle
language, it will be shown automatic-
ally. If you do not find your preferred
language in the list of options, you can
select your preferred language by
typing a 4-digit code found in the code
list on page 23. You can also set the
preferred subtitle language to OFF. In
that case no subtitles will be shown.
Panel Time-Out: Sets the time-out
interval for the Front Panel Information
Display. After the selected time, the
display will dim completely.
Status Bar Time-Out: Sets the time-
out interval for the Status Bar, after
which the Status Bar will disappear
from the screen.
Parental Control: Defines a password
used to control viewing of restricted
programs. The default password is
8888. After pressing the default
password, either the parental control
setting can be chosen, or a new
password. The five standard US rating
symbols are ”G” (General, level 1),
”PG” (Parental Guidance, level 3),
”PG13” (Parental Guidance and 13
years old, level 4), ”R” (Restricted,
level 6) and ”NC 17” (from 17 years
old, level 7). The DVD will accommo-
date a total of eight rating steps, as