Filter
Top Products
21
ENGLISH
TV MENU
As a Scart audio/video cable contains
both audio and video inputs and
outputs in one cable, the Scart
connector between the DVD Receiver
and the TV can also be used to lead
the audio output signals of your TV to
the DVD Receiver. In this way your TV
programs can be listened to over your
DSC sound system.
NOTE: Please make sure that the Scart
cable used has all pins connected. If
not, only the video signal from the DVD
Receiver will be lead to the TV.
1. Press the ON button on the remote
control to turn the DVD Receiver on.
Make sure that the Main Power
Switch on the front panel is in the
On position, shown by the blue LED
surrounding the button. Also make
sure that your video monitor
connected to the DSC 1000 is
switched on.
2. Press the TV button on the remote
control or SOURCE on the front
panel repeatedly to select the Scart
as the input source. The TV monitor
will show the TV Menu, as shown
below. You can also select the TV
Menu with the ARROW keys on the
remote control. Once the TV tab is
highlighted, press ENTER to access
it.
If the DSC controller is already in
standby, you can also switch the unit
on by pressing the TV button on the
remote control.
The TV Menu contains the following
settings. Follow the explanations in
the Upper Menu Line on the bottom of
your screen to change the settings.
Audio: Selects the Surround Mode
you would like to use when listening to
your TV or other video device
connected to the Scart input.
Level adjustment: This setting gives
you the possibility to increase or
decrease the input level of the TV, so
that its sound will have the same level
as the radio, the DVD player or the
other audio inputs.
AUX MENU
In addition to the built-in DVD-Audio/
Video and CD player, the built-in radio
and Scart audio input, you can
connect one more analog audio
source to the DSC 1000. The analog
source can be connected to the
AUDIO IN input connectors on the
rear panel.
1. Press the ON or AUX button on the
remote control to turn the DVD
Receiver on. Make sure that the
Main Power Switch on the front
panel is in the On position, shown by
the blue LED surrounding the button.
Also make sure that your video
monitor connected to the DSC 1000
is switched on.
2. Press the AUX button on the remote
control or SOURCE on the front
panel repeatedly to select this
source as the input. The TV monitor
will show the AUX Menu, as shown
below. You can also select the AUX
Menu with the ARROW keys on the
remote control. Once the AUX tab is
highlighted, press ENTER to access
it.
The AUX Menu contains the following
settings. Follow the explanations in
the Upper Menu Line on the bottom of
your screen to change the settings.
Audio: Selects the Surround Mode
you would like to use when listening to
your additional analog audio source.
Level adjustment: This setting gives
you the possibility to increase or
decrease the input level of the analog
input, so that its sound will have the
same level as the radio, the DVD
player or the other audio inputs.
DIGITAL IN MENU
In addition to all analog audio and
video sources, the DSC 1000 also
gives you the opportunity to connect
two digital audio sources, for instance
a digital set-top box or satellite
receiver. Connect these sources to
either the coaxial or optical digital
input connectors on the rear panel.
1. Press the ON or DIGITAL IN button
on the remote control to turn the
DVD Receiver on. Make sure that
the Main Power Switch on the front
panel is in the On position, shown by
the blue LED surrounding the button.
Also make sure that your video
monitor connected to the DSC 1000
is switched on.
2. Press the DIGITAL IN button on the
remote control or SOURCE on the
front panel repeatedly to select one
of the digital sources as the input.
The TV monitor will show the
DIGITAL IN Menu, as shown below.
You can also select the DIGITAL IN
Menu with the ARROW keys on the
remote control. Once the DIGITAL
IN tab is highlighted, press ENTER
to access it.
The DIGITAL IN Menu contains the
following settings. Follow the expla-
nations in the Upper Menu Line on the
bottom of your screen to change the
settings.
TV MENU, AUX MENU, DIGITAL IN MENU