Filter
Top Products
SYSTEM SETUP
16
ENGLISH
Video Settings
The Video Setting Submenu contains
the following settings. Follow the
explanations in the Upper Menu Line
on the bottom of your screen to
change the settings.
Aspect Ratio: This step selects the TV
aspect ratio, conventional screen
shape (4:3) or widescreen (16:9),
according to your TV.
TV Standard: Sets the output video
format i.e. NTSC or PAL, of the DSC
Controller. If you have a multi standard
TV, we recommend the AUTO setting
for optimal picture quality.
Scan Type: Sets the component video
output to Interlace or Progressive.
Before changing the setting to Pro-
gressive, make sure that your video
display connected to the component
output is capable of handling pro-
gressive scan signals. As soon as you
select progressive scan the scan type,
the Video Output will automatically
change to Component. All other out-
puts, composite video on cinch,
SCART and S-Video, will be kept
Interlaced. The interlaced composite
and S-Video outputs remain active for
connection to a second (interlaced)
video display.
Video Output: Sets the video output
type to Scart or Component. Scart will
be used for most TV’s. Component will
be used for most LCD, Plasma and
projectors.
Scart Output: Selects which kind of
video output signals will be routed
over the scart. RGB will be used for
most TV’s as it provides the best
picture quality.
Video Adjustment
The Video Adjustment Submenu
contains the Test Screen. First adjust
the video display device (TV) with the
help of the Test Screen. After that the
output settings of the player can be
fine-tuned with the Color, Contrast,
Brightness, Tint (NTSC and interlaced
outputs only) and Black Level (NTSC
and interlaced outputs only) settings.
In order to change the settings, move
the cursor to the “+“ or “-“ icon on the
same line as the setting. Once one of
the icons is highlighted, pressing
ENTER will increase or decrease the
value of the setting, as will be shown
in the bar behind the setting. To exit
the Video Adjustment Menu, move the
cursor to DONE, and press ENTER.