Filter
Top Products
92
Adjusting the Listening Modes
—Continued
With the Audio Adjust functions and settings, you can
adjust the sound and listening modes as you like.
Tone Control Settings
You can adjust the tone (bass and treble) of the front,
center, surround, and surround back speakers individu-
ally. For the subwoofer, you can adjust the bass.
■
Bass
You can boost or cut low-frequency sounds from –10 dB
to +10 dB in 1 dB steps.
■
Treble
You can boost or cut high-frequency sounds from
–10 dB to +10 dB in 1 dB steps.
Note:
• The tone control circuits are bypassed when the Direct
listening mode is selected.
Adjusting the Tone on the AV Receiver
Notes:
• The tone cannot be adjusted on the AV receiver when
the Direct listening mode is selected.
• The tone control settings do not apply to the THX lis-
tening modes.
Audio Adjust
1
Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “3. Audio
Adjust,” and then press [Enter].
The Audio Adjust menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select an item, and
then press [Enter].
The screen for that item appears.
4
Use the Up and Down [ ]/[ ]
buttons to select an option, and
use the Left and Right [ ]/[ ]
buttons to change it.
The Audio Adjust menu items are
explained below.
5
When you’ve finished, press the
[Setup] button.
Setup closes.
Receiver
S
e
t
u
p
Enter
Enter
3.Audio Adjust
1.Tone Control
2.Direct
3.Multiplex/Mono
4.PL x/Neo:6
5.Dolby EX
6.Theater-Dimensional
7.LFE Level
Enter
Enter
Enter
Enter
S
e
t
u
p
1
Press the AV receiver’s [Tone]
button repeatedly to select Bass
or Treble for Front, Center, Sur-
round, SurrBack, or Subwoofer.
2
Use the Tone Plus [+] and Minus
[–] buttons to adjust.
21