Filter
Top Products
24
Tuning in a radio station
Standby/On
Standby
Speakers
A
B
Phones
Bass
Treble
Master Volume
Multi CH
Input
Video 1
VCR
Video 2 Video 3 Tape
FM
AM Phono CDDVD
Dimmer
Memory
CH Level
Mode
Down UpTuning
FM Mode
Stereo
DSP
Re-EQDisplay
Listening Mode
CH Stereo5
/DTS
Surround
Digital/
Analog
SP/SYS
Setup
On
O
f
f
Power
Late Night/
Front Effect
LFE Level
Control
UpDown
Enter
Preset/Mode ADJ
FM
AM
Tuning Down/Up
FM Mode
Display
1. Press the FM or AM button.
2. Use the Tuning Up/down buttons to change the fre-
quency.
Up ..................the frequency increases.
Down.............the frequency decreases.
• The frequency changes in 50 kHz steps in FM and
10 kHz in AM each time you press the Tuning Up/
down button.
• In FM, if this button is held continuously for more than
0.5 seconds, the frequencies are scanned automati-
cally (FM auto tuning mode). When a broadcast is
received, scanning stops.
When you tune in a stereo FM station, the FM STEREO
indicator lights up if the signal is sufficiently strong.
If the signal is weak, it may be impossible to tune in to
the desired station. In this case, tune in as follows.
Press the FM Mode button. The FM MUTE indicator turns
off. At this time, the station will be in mono and intersta-
tion noise will be heard. Select the station to which you
want to listen.
Pressing the Display button each time will change the
indication as follows:
Frequency (preset No.)
↔ Listening mode
Manual tuning
Listening to a stereo radio station (FM mode)
Display button
FM
AM
1
2
ch
Down UpTuning
FM Mode
Display