Filter
Top Products
53
Advanced Operation
—Continued
You can adjust the level of individual speakers during
playback. These adjustments are temporary and will be
cancelled when the AV receiver is set to Standby.
Notes:
•You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
The DVD analog multichannel input is for connecting
components with a 5.1-channel analog audio output,
such as a DVD player or MPEG decoder.
See “Using a Multichannel Connection” on page 28 for
connection information.
Notes:
•To use the bass and treble functions with the DVD
analog multichannel input, select the Multich listening
mode first.
Adjusting Individual Speaker Levels
You can adjust the level of individual speakers while
using the DVD analog multichannel input.
Notes:
• These speaker level settings are completely indepen-
dent of those explained on pages 42 and left column.
• While the DVD analog multichannel input is selected,
you can only select the Direct or Multich listening
mode. If you select the DVD analog multichannel
input while using another listening mode, that listen-
ing mode will be cancelled.
• While the DVD analog multichannel input is selected,
the Speaker Configuration settings on page 39 is
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers, and subwoofer regardless
of those settings.
Adjusting Individual Speaker Levels
1
Press the [Receiver] button, use
the [CH SEL] button to select
each speaker, and use the
[Level–] and [Level+] buttons to
adjust the volume.
Speakers are selected in the following
order: Front Left
→
Center
→
Front
Right
→
Surr Right
→
Surr left
→
Subwoofer.
You can adjust the volume of each
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
On Standby
TV
Rec
Last Memory
AngleSubtitleAudio
MemorySearchA
-
BRepeat
RC
-
587M
TV CH
TV VOL
--
/
---
Dimmer
Tape
TV
Input
Sleep
Input
I
Test Tone
CH SEL
Surround
Direct
StereoAll ST
Level
+
Level
-
L Night
DSP DSP
SATTV VCR Cable
DVD
Receiver
CD
+
10 0
Clear
123
456
789
+
-
Video OffOpen/Close
Macro
123
MD/CDR
Cine Fltr
Input Selector
V1 V2 V3
CD Tape
DVD
Multi CH
Tuner
Remote Mode
Zone 2
Receiver
CH SEL
Level – +
Multi CH
Receiver
CH SEL
Level
+
Level
-
Using the DVD Analog Multichannel
Input
1
Press the [Receiver] button fol-
lowed by the [Multi CH] button so
that “MCH” appears on the dis-
play.
1
Use the remote controller’s [CH
SEL] button to select each
speaker, and then use the
[Level–] and [Level+] buttons to
adjust the volume.
The level can be adjusted from –12 to
+12 dB (–30 to +12 dB for the sub-
woofer).
Receiver
Multi CH
CH SEL
Level
+
Level
-