Integra DTR-4.5 Stereo Receiver User Manual


 
52
Advanced Operation
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don’t want to disturb anyone.
Notes:
The effect of the Late Night function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
The Late Night function is set to Off when the AV
receiver is set to Standby.
With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Pro Logic II Movie, DTS,
and DTS 96/24.
You can adjust the bass and treble for the front speakers,
except when the Direct mode is selected.
Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
Using the Late Night Function
(Dolby Digital only)
1
Press the [Receiver] button, and
then press the [L NIGHT] button
repeatedly to select:
Off: Late Night function off.
Low: Small reduction in dynamic
range.
High: Big reduction in dynamic
range.
Rec
Last Memory
AngleSubtitleAudio
MemorySearchA
-
BRepeat
RC
-
587M
TV VOL
--
/
---
Dimmer
Tape
TV
Input
Sleep
Test Tone
CH SEL
Surround
Direct
StereoAll ST
Level
+
Level
-
L Night
DSP DSP
SATTV VCR Cable
DVD
Receiver
CD
+
10 0
Clear
456
789
-
Video OffOpen/Close
Macro
123
MD/CDR
Cine Fltr
Input Selector
CD Tape
Tuner
Remote Mode
Zone 2
Receiver
L Night
Cine Fltr
Receiver
L Night
Using the CinemaFILTER
1
Press the [Receiver] button, and
then press the [Cine Fltr] button
repeatedly to select:
On: CinemaFILTER on.
Off: CinemaFILTER off.
Adjusting the Bass & Treble
1
Press the [Tone] button repeat-
edly to select either Bass or
Treble.
2
Use the Tone [–]/[+] buttons to
adjust.
Receiver
Cine Fltr
Standby
Zone 2
1
2