Filter
Top Products
57
• After the projector is moved, check the date and time set for the
projector before conguring the schedules. Strong shock may make the date
and time settings (
58) get out of tune.
• Events “My Image” and “Messenger” will not be executed appropriately but
result in “schedule execution error” status in case lamp does not light or/and
display data are not stored in the projector at the scheduled event execution
time.
• Events “Input Source” and “My Image” will not be executed if security feature
is enabled and the projector is locked due to the feature.
• Certain error state in the projector (such as temperature error, lamp error) will
prevent the projector from appropriate execution of scheduled functions/events.
• If no USB memory device is inserted to the projector or no image data for
display exists at the scheduled event time, a schedule execution error occurs
against the scheduled Slideshow event.
• When you start the Slideshow, input source will be automatically switched to
the USB TYPE A port.
• Image les stored in the root directory of the USB memory device will be
displayed for the scheduled Slideshow.
• Please refer to
“Troubleshooting” in the User's Manual – Operating
Guide in case scheduled functions/events are not executed appropriately as
you've set.
NOTE
3.7 Schedule Settings (Continued)
3. Web Control