Filter
Top Products
10
1.4 Selecting the network connection mode
• If you select the wireless LAN, the wireless LAN adapters in your computer
are shown in the list.
• If the wired LAN is selected, the wired LAN adapters in your computer are shown.
NOTE
After starting the “LiveViewer”, the “Select the
Network Connection” screen comes up.
Select the network connection that you would like
to use. There are 3 options in the menu.
• Wireless LAN
• Wired LAN
• My Connection
If you select either the wireless LAN or wired LAN, proceed to item 1.4.1 Selecting either
the wireless LAN or wired LAN. (
below)
If you select My Connection, jump to item 1.4.2 Selecting My Connection. (
12)
[Troubleshooting]
If you select either the wireless LAN or wired LAN,
a list of the network adapters in your computer is
shown in the menu.
Select what you like to use in the list, and click the
[Next].
Then, proceed to item 1.5 Selecting the network
connection method. (
14)
1.4.1 Selecting either the wireless LAN or wired LAN
Are you sure that you want to turn on the network adapter?
The screen is displayed in the case that the
selected network adapter is invalid.
• To turn it on, click the [Yes], and then proceed
to item 1.5. (
14)
• Not to turn it on, click the [No], and then the
screen is back to the previous one to select
another network adapter.
1. Connection to the network
• Select Wireless LAN only when you connect the computer and the access
point via wireless network and connect the access point and the projector via wired
network, since the projector doesn't have wireless LAN function.
NOTE