Filter
Top Products
25
HP Library & Tape Tools software provides a number of utilities for getting information about your
tape drive and troubleshooting problems. It includes the following functions:
• Installation help and advice to help you install your product and operate it correctly
• Discovery to find out what devices are attached to your SCSI bus
• Identity to find out detailed information about individual devices, for example the firmware version
• Tests to check that your drive is operating correctly
• Firmware Update to help you find update files for your tape drive and allow you to perform the
update
• Support Ticket
to generate detailed troubleshooting information for support calls (if you are
connected to the Internet, you will be able to email this information directly to your Support Center)
• Comprehensive Help that is context sensitive, if you need additional information for the screen
currently displayed
HP Library & Tape Tools does not work on all operating systems. For the latest compatibility
information, updates, and the latest versions of this software, refer to our World Wide Web site:
//www.hp.com/support/tapetools.
Installing HP Library & Tape Tools
You can install HP Library & Tape Tools from the web site: //www.hp.com/support/tapetools.
Installation is simply a question of selecting the required option and following the instructions on the
screen.
Using HP Library & Tape Tools
HP Library & Tape Tools checks for the presence of a SCSI controller and its driver software and
identifies the SCSI IDs of existing SCSI devices. You can then select the required device from the device
list and run one of the diagnostic utilities for that device by selecting the appropriate icon: Identity,
Firmware, Test or Support.
For ease of use, comprehensive online help is built into the software.
Dlt1getstart_int.fm Page 25 Thursday, November 16, 2000 1:47 PM