Filter
Top Products
13
Note Write the model name, product number, serial number, and SCSI ID of your drive somewhere safe
for future reference. The model name is on the front of the drive and the product and serial numbers
are on a label on the top of the drive.
1 Slide the tape drive into the open bay, aligning the tray or rails with the slots in the bay, as shown
in figure 4.
If your computer does not use mounting hardware, check that the holes in the chassis are aligned with
the holes in the side of the tape drive.
Do not secure the drive with screws at this point because you may have to move the drive to get the
cables into place.
2 Install a SCSI host adapter in the selected server or workstation now, if necessary. For information on
SCSI host requirements, see page 3.
Dlt1getstart_int.fm Page 13 Thursday, November 16, 2000 1:47 PM