Filter
Top Products
Operation
Full-OSD
A second display option is to have a full
screen report of the AVR65’s status
appear. To activate the full OSD, press the
OSD button
o
three times in quick
succession. The first press will turn the
semi-OSD on, the second will turn the
semi-OSD off, and the third will bring a
full status report to the screen.
Note that the status report will vary
depending on the type of audio input
source in use. When an analog source is
in use, the first line in the display will show
which audio input is active (Figure 6).
When a digital audio source is in use,
the display will indicate if the coaxial or
optical input is active (Figure 7).
Figure 6
Figure 7
AUDIO SOURCE :DIGITAL
VIDEO SOURCE :DVD
AUDIO INPUT :OPTICAL
TAPE MONITOR :OFF ON
SURR. MODE :DOLBY
DIGITAL
MULTI ROOM :OFF ON
MASTER VOLUME:19DB
AUDIO SOURCE :DVD
VIDEO SOURCE :DVD
AUDIO INPUT :ANALOG
TAPE MONITOR :OFF ON
SURR. MODE :PRO LOGIC
MULTI ROOM :OFFON
MASTER VOLUME:19DB
24
AVR65 120 volt Rev (C) 10/6/98
Activating the full-OSD will also simplify
adjustments to any system parameter, as
all choices will be shown. The selected
option will appear in reversed, highlighted
video, while other choices will appear in
normal white on blue video.
The full-OSD system may be turned off
by pressing the OSD button
o
once.
Source Selection
• To select a source at any time, press
any of the Source Selector buttons on
the remote
k
or front panel
9 ) !
@ # $
.
• The front panel Video 3 Inputs
8
may be used to connect a device such as
a video game or camcorder to your home
entertainment system on a temporary
basis.
• When an audio source is selected the
last video input used remains routed to
the Video Outputs 1 ¢ and TV
Monitor Output ‡. This permits
simultaneous viewing and listening to
different sources.
• During a listening session you may
wish to adjust the Bass
5
and Treble
6
controls to suit your listening tastes.
• Adjust the volume to a comfortable
level using the front panel Volume
Control Ù or remote Volume
Up/Down
z
buttons.
• To temporarily silence all speaker
outputs press the Mute button
d Û
.
This will cut the output to all speakers,
but it will not effect any recording or
dubbing that may be in progress. When
the system is muted the MUTE indicator
A will light in the Information
Display
˝
. Press the Mute button
d
Û
again to return to normal operation.
• For private listening, plug the
1
/4"
stereo phone plug from a pair of stereo
headphones into the front panel
Headphone jack
4
.
• When a Video Input source is selected
the video signal for that input will be
routed to the TV Monitor Video Output
jack ‡ and will be viewable on a TV mon-
itor connected to the AVR65. Make certain
that your TV is set to the proper input to
view the signal.
• To program the AVR65 for automatic
turn off, press the Sleep button
`
on
the remote. Each press of the button will
increase the time before shut down in the
following sequence:
The sleep time will be displayed in the
Information Display and it will count
down until the time has elapsed.
When the programmed time has elapsed
the unit will automatically turn off. Note
that the front panel display will dim to
one half brightness when the Sleep func-
tion is programmed. To cancel the Sleep
function, press the Sleep button
`
until the information display returns to
normal brightness and the Sleep
indicator numbers disappear.
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
5
min
1
min
OFF