Filter
Top Products
41
5.4 Adjustment after replacement of unit
After completion of the assembly work mentioned above, use the following procedures for adjust-
ment and setting. Adjustment should be performed using the HHC.
(1) After replacement of electronics unit (including replacement of internal parts)
(2) After replacement of detecting unit (including replacement of internal parts)
Adjustment
Step Adjustment item Relevant page
1 Constant current output (output circuit) P19
2TAG. No. P11
3 Type P12
4 Industrial value unit P13
5 Range (zero/span) P14
6 Zero/span adjustment P18
7 Damping P15
8Output mode (LIN/
selection) P16
9 Burnout direction P17
10 Lock of adjustment function P22
Step Adjustment item Relevant page
1 Range (zero/span) P14