Filter
Top Products
12
Display of SERIAL N°.
SERIAL N°. and transmitters
software version are displayed.
• After setting TYPE, press the
<INC> key to display SERIAL
NO. and software version of
transmitter.
• By pressing the <INC> key,
UNIT setting image is
displayed.
3: SERIAL No.
N8G07131
VERSION 1.1
< INC >
2 :TYPE
INC
INC
4 :UNIT
TYPE
Type of field device is displayed and
changed (ex. of differential pressure
transmitter).
•After TAG N°. is displayed, press
the <INC> key to display TYPE
image.
• To make changes press the
<CHNG> key under display 1 and
the cursor will be displayed under
display 2 .
• Set the alphanumeric keys as
necessary under display 2 . To set
the alphabet, press the <CHNG
ALHA> key first. Using < >< >
keys, cursor position can be moved.
•At the completion of setting, press
the <ENT> key and a prompt is
displayed check entry under
display 2 .
• If the entry is correct, press the
<ENT> key to input it to the field
device under display 3 and 4 and
the initial image 1 is displayed.
• To display SERIAL NO., press the
<INC> key under display 1 .
2: TYPE
FKCXXXXX-XXXXX
< INC > < CHANGE >
2-1:TYPE CHANGE
FKCXXXXX-XXXXX
< ENT > < CL >
2-1:TYPE CHANGE
FKCXXXXX-XXXXX
CHNG OK?< ENT/CL >
2-2:TYPE WRITE
FKCXXXXX-XXXXX
To Menu
3 : SERIAL N°
Menu 1 : TAG N°
CL
INC
INC
CHNG
CL
ENT
ENT
after setting
1
2
3
4