Filter
Top Products
i
INTRODUCTION
Thank you very much for your purchase of the Fuji FCX-CII Series Transmitter.
This instruction manual covers the FCX-CII series transmitter and contains information about the
installation, piping, wiring, operation and maintenance of the FCX-CII series (FKK...4 • FKP...4 •
FKP...E).
The product conforms to the requirements of the
Electromagnetic compatibility Directive 89/336/EEC as
detailed within the technical construction file number
TN513035. The applicable standards used to demonstrate
compliance are :-
EN 50081-2 :-1993 Conducted and Radiated emissions
EN 50082-2 :-1995 Radiated immunity, ESD and FBT
• First read this instruction manual carefully until an adequate understanding is required, and then
proceed to installation, operation and maintenance of the FCX-CII Series transmitter.
• The specifications of the transmitter will be changed without prior notice for further product
improvement.
•Modification of the transmitter without permission is strictly prohibited. Fuji will not bear any
responsibility for a trouble caused by such a modification.
• This instruction manual should be kept by a person who is actually using the transmitter.
• After reading this manual, keep it at a place easier to access.
• This manual should be delivered to the end user without fail.
• For detail specifications and outline diagrams, refer to the specifications furnished separately.
INTRODUCTION
Manufacturer: Fuji Electric France
Type: Described in nameplate on main frame (see Page v)
Date of manufacture: Described in nameplate on main frame
Product nationality: France
Request
• Transcription of a part or the whole of this manual without per-
mission is prohibited.
• The contents of this manual are subject to change without prior
notice.
© Fuji Electric France 2002
Issued in February, 2002