Filter
Top Products
701/702
Users Manual
2
Damping (smoothing of the last several
readings).
Display of measurements in engineering units or
percent of scale.
Data logging (Model 702 only).
• Features available in SOURCE mode:
An output ramp feature for testing limit switches.
Trip detect is either a 1V change or a continuity
status change (Open or Short) from one ramp
increment to the next.
An output step feature in which you set the step
size and press
uor dto step the output in
engineering units or percent of scale.
Unless stated otherwise, everything in this
manual applies to both the Fluke 701 and 702
Documenting Process Calibrators. For
maintenance, repair, performance testing, and
calibration instructions, order the 701/702
Service Manual (PN 944525). The phone
number in the USA and Canada for replacement
parts is: 1-800-526-4731. For service help in the
USA and Canada call 1-800-825-9810. For
application or operation assistance on Fluke
products call:
800-44-FLUKE (800-443-5853) in USA and
Canada
(31 40) 644200 in Europe
(206) 356-5500 from other countries