Filter
Top Products
FOX 2G Tx/Rx AV • Conguration
Configuration, cont’d
3-18
Video Adjustment area
The Video Adjustment area allows adjustments to the color, tint,
contrast, and brightness of the picture that is displayed.
Figure 3-10 — Video Adjustment area
Video Format areas
The Video Format areas (Input Video Format and Output Video
Format) provide radio buttons that allow the input format (auto,
component, S-video, or composite) and output format (follow
input type, component, S-video, or composite) to be selected.
Figure 3-11 — Video Format area
N
The transmitter converts the input signal into a
proprietary signal type, which passes through Link 1 to
the receiver. The receiver converts the signal back to the
required signal type. This allows the input signal to be
transcoded to meet the requirements of the output device.
When Auto is selected for the input format, the transmitter will
automatically detect the signal type. When follow input type is
selected for the output format, the output signal will be in the
same format as the original input signal.