Filter
Top Products
DVC 501 SD • Reference Information 29
Part Numbers and Accessories
Included Parts
Description Part Number
DVC 501 SD 60-1033-01
Rubber feet (not attached) (4)
IEC power cord (1)
5-pole captive screw connectors (2)
DVC 501 SD Setup Guide
Optional Accessories
These items can be ordered separately:
Description Part Number
RSU Universal Rack Shelf Kit 60-190-01
RSB Basic Rack Shelf 60-604-02
MBU 125 Under-desk Mounting Kit 70-077-01
MBD 129 Through-desk Mounting Kit 70-077-02
UC50' Universal Projector Control cable, 50' (15.2 m) 26-518-01
UC100' Universal Projector Control cable, 100' (30.4 m) 26-518-02
Mounting the DVC 501 SD Converter
Rack Mounting
UL guidelines for rack mounting
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
DVC 501 SD in a rack:
• Elevated operating ambient temperature — If the equipment is installed in a closed
or multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, consider installing the
equipment in an environment compatible with the maximum ambient temperature
(TMA) specified by the manufacturer.
• Reduced air flow — Install the equipment in the rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
• Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
• Circuit overloading — When connecting the equipment to the supply circuit, consider
the effect that circuit overloading might have on overcurrent protection and supply
wiring. Consider equipment nameplate ratings when addressing this concern.
• Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (such as the use of power strips).