Filter
Top Products
DVC 501 SD • Operation 20
12. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
• The Transfer Time section shows the amount of remaining and elapsed time for the
update.
• The Total Progress section displays a status bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and the Status column displays Uploading.
The LCD screen on the DVC front panel displays FW. UPLOAD PLEASE WAIT.
Figure 23. Firmware Upload in Progress
When the upload is complete, the Remaining Time field in the Transfer Time section
shows 00:00:00, the Progress column shows 100%, and Completed is displayed above
the progress bar and in the Status column.
Figure 24. Firmware Upload Complete
The LCD screen briefly displays the Extron S
3
logo, then returns to the default cycle.
13. When the firmware upload and unit reset are complete, close the Firmware Loader
window.