Filter
Top Products
Reference Manual
00809-0100-4697, Rev EA
October 2011
3-19
Rosemount 848T
Changing the Sensor Configuration in the Transducer Block
If the F
OUNDATION fieldbus configuration tool or host system does not support
the use of DD methods for device configuration, the following steps illustrate
how to change the sensor configuration in the transducer block:
1. Set the MODE_BLK.TARGET to OOS, or set the SENSOR_MODE to
configuration.
2. Set SENSOR_n_CONFIG.SENSOR to the appropriate sensor type,
and then set SENSOR_n_CONFIG.CONNECTION to the appropriate
type and connection.
3. In the Transducer Block, set MODE_BLK.TARGET to AUTO, or set
the SENSOR_MODE to operation.
48 VALIDATION_SNSR2_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
49 VALIDATION_SNSR3_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
50 VALIDATION_SNSR3_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
51 VALIDATION_SNSR4_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
52 VALIDATION_SNSR4_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
53 VALIDATION_SNSR5_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
54 VALIDATION_SNSR5_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
55 VALIDATION_SNSR6_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
56 VALIDATION_SNSR6_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
57 VALIDATION_SNSR7_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
58 VALIDATION_SNSR7_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
59 VALIDATION_SNSR8_CONFIG Validation configuration parameters. Please see tables below for a list of sub-parameters
that pertain to Validation Configuration functions.
60 VALIDATION_SNSR8_VALUES Validation value parameters. Please see tables below for a list of sub-parameters that
pertain to Validation values.
Table 3-10. Transducer Block Parameters
Number Parameter Description