Filter
Top Products
Reference Manual
00809-0100-4697, Rev EA
October 2011
Rosemount 848T
2-2
Mounting to a DIN Rail
Without an Enclosure
To mount the 848T to a DIN rail without an enclosure, follow these steps:
1. Pull up the DIN rail mounting clip located on the top back side of the
transmitter.
2. Hinge the DIN rail into the slots on the bottom of the transmitter.
3. Tilt the 848T and place onto the DIN rail. Release the mounting clip.
The transmitter should be securely fastened to the DIN rail.
Figure 2-1. Mounting the 848T
to a DIN Rail
Mounting to a Panel with
a Junction Box
When inside of a plastic or aluminum junction box, the 848T mounts to a
panel using four
1
/4-20 x 1.25-in. screws.
When inside of a stainless steel junction box, the 848T mounts to a panel
using two
1
/4-20 x
1
/2-in. screws.
Figure 2-2. Mounting the 848T
junction box to a panel
DIN Rail Mounting Clip
848T without
installed
enclosure
Aluminum/Plastic Stainless Steel
848T with aluminum or plastic box
Panel
Mounting
Screws (4)
Cover
Screws (4)
848T with a stainless steel box
Panel
Mounting
Screws (2)
DIN Rail