Filter
Top Products
Reference Manual
00809-0100-4697, Rev EA
October 2011
D-17
Rosemount 848T
Functionality
Figure D-5. Input Selector
Function Block Schematic
Block Errors
Table D-7 lists conditions reported in the BLOCK_ERR parameter. Conditions
in bold are inactive for the ISEL block and are given for reference.
Table D-7. BLOCK_ERR
Conditions
Mode Logic
OP_SELECT
OUT_D
Alarm
MIN_GOOD
STATUS_OPTS
DISABLE_n
IN_n
Selection
Logic
SELECT_TYPE
SELECTED
OUT
Number Name and Description
0 Other: The output has a quality of uncertain.
1 Block Configuration Error: Select type is not configured
2 Link Configuration Error
3 Simulate Active
4 Local Override
5 Device Fault State Set
6 Device Needs Maintenance Soon
7 Input Failure/Process Variable has Bad Status: One of the inputs is Bad.
8 Output Failure
9 Memory Failure
10 Lost Static Data
11 Lost NV Data
12 Readback Check Failed
13 Device Needs Maintenance Now
14 Power Up: The device was just powered-up.
15 Out of Service: The actual mode is out of service.