Filter
Top Products
ENGLISH
13
2 Connecting the AC adaptor
2
1
Set the DN-V1700’s power switch to the OFF position.
POWER
ONOFF
Insert the power cord’s inlet into the AC adaptor’s AC input side.
3
Insert the AC adaptor’s DC plug into the DN-V1700’s DC jack.
Mount the DC plug disconnection prevention fittings (A and B) so
that the DC plug does not come disconnected.
Short screw
Long
screw
4
Plug the power cord into a power outlet.
Cautions on the AC Adaptor
•
Be sure to use the included AC adaptor.
•
Be sure to set the DN-V1700’s power switch to the OFF position when plugging in and unplugging the AC adaptor.
•
Note that plugging in the AC adaptor while the set’s power is turned on may damage the set or the IC memory card.
•
Do not pull on the DC plug cord with excessive force when the DC plug disconnection prevention fittings (A and B) are connected.
Doing so will damage the DC plug cord, possibly damaging the set.