Filter
Top Products
ENGLISH
69
11
Press the TIMER/SET button.
• The “PM12” in the hours’ place is stored in the memory.
TIMER/SET
Main unit
Off PM12:00
12
Set the minutes’ place to “56”.
Off PM12:56
FUNCTION
/SELECT
Main unit
13
Press the TIMER/SET button.
• The end time is stored in the
memory
•“T.Stdby” is displayed and the
timer can now be turned on or off.
TIMER/SET
Main unit
14
Set the timer standby mode to on or off.
•“ON” or “OFF” (the one that has been selected) flashes.
Select “ON” if you want the timer to operate. (When set
to “ON”, the mark appears on the display.)
T.StdbyON OFF
FUNCTION
/SELECT
Main unit
15
Press the TIMER/SET button.
• This completes the setting of the
timer.
TIMER/SET
Main unit
16
Turn off the main unit’s power.
• The power is set to the standby
mode.
• If the timer standby mode is set to
“ON”, the power LED is lit orange.
• The disc starts playing when the
timer start time is reached.
ON / STANDBY
Main unit
Orange
✽ When the display’s mark is lit or the power LED is lit orange
when the power is in the standby mode, the timer will operate at
the same times every day. (Everyday timer)
✽ If you do not want the timer to operate, press the TIMER/SET
button to display “T.Stdby” and set to “OFF”.
(The display’s mark turns off.)
✽ If you make a mistake when setting the timer, with steps 5 to 12
press the TIMER/SET button and hold it in for at least 2 seconds to
return to step 3, and start over from there.
NOTES:
• If the current time is not set, the timer standby setting cannot
be set to “ON”. Be sure to set the current time before turning
on the timer.
• The timer will operate as long as it is turned on, even if the time
setting is off due to a power failure. If you want the timer to
operate correctly, be sure the current time is properly set.
• If the timer start time is reached while the power is turned on,
the set operates as set for the timer. (The timer settings are
given priority.)
• Be sure to set the power to the standby mode to operate the
timer.
9
Press the TIMER/SET button.
• The start time is stored in the memory, and the end time
can now be set.
TIMER/SET
Main unit
Off AM12:00
10
Setting the timer end time
Set the hours’ place to “PM12”.
Off PM12:00
FUNCTION
/SELECT
Main unit
✽ Select ON/OFF. If an operation is not performed within 4
seconds, the setting will be made automatically and there
will be a return to the normal display. (Operation 15 is not
necessary.)
7
Press the TIMER/SET button.
• The “PM12” in the hours’ place is
stored in the memory.
TIMER/SET
Main unit
On PM12:00
8
Set the minutes’ place to “35”.
On PM12:35
FUNCTION
/SELECT
Main unit
6
Setting the timer start time
Set the hours’ place to “PM12”.
On PM12:00
FUNCTION
/SELECT
Main unit
2
To Listen to the TUNER with the Everyday Timer
• Set “Timer TUNER” in Step 4, then press the TIMER/SET
button.
•
“”
will be displayed. Use the FUNCTION/SELECT
dial to select the preset channel on which you would like to
receive with the timer, then press the TIMER/SET button.
• Hereafter, the same procedure is performed from Step 6.
P--FM....M