Filter
Top Products
This button can be pressed at any time during the system setup
process to complete the process.
30
ENGLISH
[4]Setting the DVD auto power off
• The ADV-700 is equipped with a function that automatically
switches the power to standby if no operation is performed for 30
minutes while in the stop mode with the function set to DVD. Here,
set whether to turn this function on or off.
• The factory default setting is “NO”.
1
To perform these operations from places other than the
system setting change menu, see page 26.
2
At the “SYSTEM SETUP MENU”.screen, select “DVD AUTO
POWRE OFF”.and press the ENTER button.
• Switch to the “DVD AUTO POWER OFF”.screen.
3
Select “YES” or “NO”.
• YES: The auto power off function is active when the function is set
to DVD.
• NO: The auto power off function does not work.
4
Enter the setting.
• The SYSTEM SETUP MENU reappears.
[5]After completing system setup
• Once the speaker settings, delay time setting and channel level
adjustments are made, there is no need to reset them unless the AV
components or speakers are changed or the speakers are moved to
different positions.
• Change the DVD auto power off settings as necessary.
1
At the SYSTEM SETUP MENU, press
the SETUP button.
• The changed settings are entered and
the on-screen display turns off.
NOTE:
• If the quick system settings are selected after setting up the
system using the system setting change menu, the speaker and
delay time settings are changed to the values preset for the quick
system settings.
B
FINISH: ENTER BUTTON
DVD AUTO POWER OFF
SELECT :
YESYES NONO
(DVD FUNCTION ONLY)(DVD FUNCTION ONLY)
AUTO POWER OFFAUTO POWER OFF
ENTER
SETUP
ENTER
Remote control unit Remote control unit
Remote control unit
Remote control unit