Denon ADV-700 Stereo Receiver User Manual


 
ENGLISH
68
Description of timer
The timer can be used to switch the power between the ON and
STANDBY (OFF) modes once every day at the same time.
(Everyday timer)
The timer can be used to play DVDs, CDs or TUNER.
Before setting the timer
Set the current time.
Be careful to set the right time.
Checking the timer settings
Use the same procedure as when setting the timer to check the
timer settings.
q Press the TIMER/SET button for at least 2 seconds to set the
timer setting mode.
w Now press the TIMER/SET button again repeatedly to display
the timer start function, the start time and end times.
e After the end time (minutes) is displayed, the timer standby
setting is displayed, and when the TIMER/SET button is pressed
again the display returns to as it was before the timer was set.
Changing the timer settings
Reset the timer using the new settings.
The previous settings are cleared when they are replaced with the
new settings.
Clearing the timer settings
With Step 4 to 12 displayed, press the TIMER/SET button for at
least 2 seconds. All the timer settings are cleared.
Press the TIMER/SET button again for a least 2 seconds, the
display returns to as it was before the timer was set.
Turning the timer off
Press the TIMER/SET button, and when T.Stdby is displayed,
turn the FUNCTION/SELECT dial to select OFF. (The displays
mark turns off.)
If there is a power failure
If there is a power failure or if the power cord has been unplugged,
the clock display flashes once the power comes back on, the clock
resumes counting, and if the timer was set the timer operates
according to the clock. Be sure to correct the current time setting.
(2) Everyday timer (3) Setting the Everyday timer
Example: To listen to a CD from 12:35 p.m. to 12:56 p.m.
1
c 8 1:02:46
DVD
TONE
2,3,5,7,9,11,13,151,16
4,6,8,10,12,14
1
Turn on the power
Load a CD into the main unit for the
purpose of timer play.
ON / STANDBY
Main unit
Perform this operation after setting the current time (steps 1 to 7
on page 67).
2
Press the TIMER/SET button for at least 2 seconds.
If the time is set, EVERYDAY is displayed.
TIMER/SET
Main unit
EVERYDAY
5
Press the TIMER/SET button.
The timer setting mode is set and the timer start time
setting can be made.
TIMER/SET
Main unit
On AM12:00
Green
3
Press the TIMER/SET button.
•“Timer FUNC is displayed.
TIMER/SET
Main unit
Timer FUNC
4
Setting the timer start function.
Set the function to DVD.
Timer DVD
FUNCTION
/SELECT
Main unit
SET TIME is displayed when the time setting has not
been made. Perform operations 3 to 7 of Page 67, then
perform the timer setting again