Filter
Top Products
42
ENGLISH
[2]Dolby Pro Logic II mode settings
• Use the Dolby Pro Logic II mode to play program sources with the mark and CDs and other 2-channel sources
with Dolby Pro Logic II processing.
• One of the following three modes can be selected in the Dolby Pro Logic II mode:
q CINEMA mode: This mode is optimum for movies and other Dolby Surround programs.
w MUSIC mode: This mode is optimum for stereo music programs.
e PRO LOGIC compatible mode: This is the conventional Dolby Surround Pro Logic mode.
1
c 8 1:02:46
DVD
TONE
1
1
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
TV/VCR
CH
VOL
SLEEP
ON
OFF
REMOCON MODE
2
3
4
56
8
9
CLEAR
CALL
0
+10
7
1
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWERVCR POWER
TV POWERTV POWER
TV
VCR
NTSC/PAL
MEMO
POWERPOWER
CH
CH
CH
2,4
3,5
1
3,5
1
Set the surround mode to “AUTO DECODE”.
SURROUND
MODE
Main unit
FUNCTION
/SELECT
Main unit
SURROUND
Remote control unit
✽ This can be selected when the digital input consists of no
signal, PCM signals, Dolby Digital signals, as well as when
the analog input is selected.
(It cannot be set when Dolby Digital or DTS signals are
being input.)
2
Press the SURR.PARA button on the remote control unit to
display the Dolby Pro Logic II mode setting.
SURR.PARA
Remote control unit
PLII CINEMA
3
Select the optimum mode according the source.
Remote control unit
PLII DOLBY PL PLII CINEMA PLII MUSIC
4
Set the surround parameters
according to the selected mode.
• The parameters switch as shown
below each time the button is
pressed.
DEFAULT
DEFAULT PANORAMA
DIMENSION
CENTER WIDTH
DEFAULT
PL
II CINEMA PLII MUSICPLII DOLBY PL
SURR.PARA
Remote control unit
,/